SAW Touchscreen
5-Wire Resistive Touch
  5-Wire Panel Model List
  5-Wire Specification 6"-24"
  5-Wire Structure Part
  5-Wire Touch Driver

Technical Specification of 5-wire Resistive Touchscreen Panel and Controller   


 Download 5-Wires resistive touch panel specification: 5-Wire resistive User Manual.pdf


          5-Wires Resistive Touchscreen Panel Technical Specification



5- wire Resistive Touchscreen


Glass, uniform resistive coating, polyester coversheet, transparent insulating dots, conductive coating

Deviation of Error

Less than 3.5 mm)


4096 X 4096

Touch Point Density

100,000 touchpoints/in2 (15,500 touchpoints/cm2)

Touch Activation Force

20-120 grams)

Response Time

Less than 5 milliseconds

Surface Hardness

Moths 3

Life Time

More than 35 million touches in one location without failure


Over 50,000 hours

Dust-Proof and Water-Proof

Meet NEMA 4 and 12, and IP 65 standards

Light Transmission


Operating Temperature

-20°C to 80°C

Storage Temperature

-40°C to 80°C

Operating Humidity


Storage Humidity


Operating Altitude

10,000 feet above sea level

Storage Altitude

50,000 feet above sea level

Chemical Resistance

Acetone, Methylene chloride, Methyl ethyl ketone, Isopropyl alcohol, Hexane, Turpentine, Mineral spirits, Unleaded Gasoline, Diesel Fuel, Motor Oil, Transmission Fluid, Antifreeze


Controller Technical Specification



Controller Interface

USB and RS232 interface

Power Requirements

+5VDC (max. 100mA, typical 70mA, 50mV peak to peak max ripple)

Operating Temperature

0 to 70 degrees Centigrade

Storage Temperature

-40 to 80 degrees Centigrade

Relative Humidity

95% at 60 degrees Centigrade


RS232: 9600 bauds, None parity, 8 data bits, 1 stop bit


USB: USB 1.1 Low speed


4096 x 4096

Accuracy Tolerance

Max. +/- 0.5% tolerance

Response Time

Max. 35 ms


more than 50,000 hours


 Warranty:  3 Year for 5-Wire Resistive Touchscreen Panel and Controller


Copyright © 2007-2008 AKG Technology All Rights Reserved.